强磁场对四苯基卟啉及其Co(Ⅱ)/Zn(Ⅱ)配合物的影响

为研究强磁场对卟啉类化合物的影响,以四苯基卟啉(TPP)为研究对象,比较分析了无外加磁场和强磁场条件下TPP的结晶,及Co~(2+)、Zn~(2+)与TPP的配位反应。采用X射线粉末衍射测试不同磁场强度下获得的TPP晶体,紫外分光光度计快速测定了不同磁场强度下配合物产率,并分析了配位反应的动力学。TPP的结晶度随磁场强度的增强而提高,晶体尺寸随磁场强度的增加而增大;随磁场的增强,四苯基钴卟啉(CoTPP)和四苯基锌卟啉(ZnTPP)的产率下降,但两者的反应动力学不受磁场影响,其反应速率随磁场强度提高而下降。由研究结果可知,强磁场有利于四苯基卟啉的结晶取向,四苯基卟啉在溶液中垂直于磁场取向是配位反应速率降低的主要原因,随磁场强度的增加,四苯基卟啉的取向程度提高。     

On-column injection onto capillary columns. Part 2: Study of sampling conditions; practical recommendations

During one year continuous use of on-column injection, the typical advantages described in our first report have fully been confirmed. In addition the analysis of large sample volumes has proved promising. Only minor modifications have been applied to the on-column injector device. Broad evidence has been gathered showing that full separation efficiency of the capillary columns after on-column injection is attained only when cold trapping or the solvent effect, as band shortening mechanisms, are working- While, under the conditions of on-column injection, cold trapping is less efficient than with other injection techniques, the opposite holds true for the solvent effect. Compared with splitless injection, the danger of excessive solvent condensation on the column is increased. A working rule is presented for establishing the optimal chromatographic conditions for handling large sample volumes while ensuring full separation efficiency yet avoiding harm to the column.     

Lithium bromide in acetonitrile: Thermodynamics,theory, and simulation

A variety of methods has been used for the study of lithium bromide solutions in acetonitrile yielding by their combination reliable information on different levels of approximation. Osmotic coefficients based on precise vapor pressure measurements are reproduced by CM (chemical model) and HNC (hypernetted chain) calculations and by BD (brownian dynamics) simulations. The results of neutron scattering experiments are treated with the help of HNC and BD methods. Hartree-Fock calculations on isolated LiBr pairs and solvated lithium ions yield reliable particle distances and reveal the geometry of the lithium solvation sphere.     

Tetramethylammonium-calcium-triazid. Darstellung und Kristallstruktur

[N(CH₃)₄]Ca(N₃)₃,M=240.29, was prepared from aqueous solutions of tetramethylammoniumazide with calciumazide at 298 K. The crystals are tetragonala=936.6(7) pm,c=694.7(5)pm, space group P4/nmm,Z=2, (x)=1.31Mgm^–3. The crystal structure was determined by single crystal x-ray diffraction (234 Mo-K-reflections, =0.469 mm^–1,R=0.064). Calcium is octahedrally coordinated to six azide groups. The octahedra are connected via azide groups to a threedimensional array with the complex ammonium ions between. The terminal nitrogen atoms of the azide groups and the methyl groups are considerably disordered.

     

Interaction of aryldiazonium salts with some schiff-base complexes of cobalt and ruthenium

The interaction of aryldiazonium ions with some Schiff-base complexes of cobalt and ruthenium have been studied. With cobalt, one-electron oxidation of [Co(II)Salen] occurred; with [Co(I)Salen] the corresponding Co(III)-aryl complexes were isolated. In the case of ruthenium oxidation also occurs, [Ru(Salen)(CO)py] gave the corresponding monocation. The results, especially for ruthenium, are in contrast to the stabilisation of both nitrosyl and aryldiazonium adducts in analogous porphyrin complexes.     

Determination of phenol and catechol concentrations with oxygen probes coated with immobilized enzymes or immobilized cells

The enzyme phenol 2-hydroxylase was immobilized on Sepharose and used in conjunction with an O₂ electrode for quantitating phenol. Similarly, catechol 1,2-oxygenase was used for quantitating catechol. A third probe was prepared by immobilization ofTrichosporon cutaneum cells rather than purified phenol 2-hydroxylase for phenol quantitation. The whole cell system gave results comparable to the immobilized enzyme system.     

Isomorphic electron orbitals for vibronic flexibility in a cyclopropenyl radical molecular device

Summary The vibronic character of this molecular device has been studied using isomorphic electron orbitals. The leading role of the softest vibrational mode for the electron transport process is stressed by the quantum mechanical treatment of the rearrangement operator. The theory was used to investigate the possible function of the soliton valve, which has been suggested as a switching tip. The electronic flexibility of the cyclopropenyl radical with respect to molecular vibrations, which is important for the function of the molecular device, is well characterized by the hardness and softness of the electron structure in terms of the orbital energy-occupation number correlation diagram.     

Substituenteneffekte auf die C–C-Bindungsstärke, 8. Standardbildungsenthalpien und Spannungsenthalpien von 1,1,2,2-Tetraethylethylenglykol-dimethylether und D,L-1,2-Dimethyl-1,2-diphenylethylenglykol-dimethylether

Effects of Substituents on the Strength of C - C Bonds, 8¹. - Heats of Formation and Strain of 1,1,2,2-Tetraethylethylene Glycol Dimethyl Ether and D,L .-1,2-Dimethyl-l,2-diphenylethylene Glycol Dimethyl Ether The heats of combustion of the title compounds 1 and 2 were measured calorimetrically with the result (kcal mol ^-1, s. d. in parentheses) ΔH°_c = − 1880.1 (± 0.6) and − 2373.3 (± 1.4). The heat of vaporisation of 1 ΔH^v = 14.3 (± 0.3) and the heat of sublimation of 2 ΔH^sub = 27.2 (± 0.5) were derived from their temperature dependance of the vapor pressure. The latter were determined between 30 and 80°C using a flow method. The resulting standard heats of formation ΔH°_t(g) = −122.4 (± 0.7) and −43.8 (±1.5) for 1 and 2 correspond to a strain enthalpy (_s) of 15.9 and 8.0 kcal mol^-1, respectively. The steric strain of the dimethoxyethanes 1 and 2 is about one fourth lower than the strain of the corresponding dimethylethanes 3 and 4 bearing the same substituents. Thus, a methoxy group causes less steric stress than a methyl group.     

Effect of method of solution on observed molecular weight distribution of barley starch and starch derivatives in size exclusion chromatography

Summary Samples of native barley starch and six starch derivatives were suspended (0.1% sample concentration) in four different solvents: the eluent (pH 11 buffer), dimethylsulfoxide, 0.1 M NaOH or 0.5 M NaOH and kept in a boilling water bath for 5 to 60 minutes or shaken for 60 minutes. The average molecular weight values , and the polydispersity value were determined with a TSK PW-type column using narrow standard calibration. Only a small part of the samples dissolved in the eluent. The dissolution of sample in dimethylsulfoxide was dependent on sample type. Of the NaOH solutions, 0.5 M NaOH was the only one that dissolved all the samples. Therefore, 0.5 M NaOH appears to be the solvent of choice for starch molecules.     

A force field study of diacetylene molecule by kinetic constant method

The potential constants of diacetylene molecule has been evaluated using kinetic constants. The other molecular constants such as the generalised vibrational mean amplitudes, shrinkage constants, Coriolis coupling constants and centrifugal distortion constants are also calculated using the vibrational frequencies and the results discussed.